【DIRECTIONS FOR USE】

Allow the test Card, urine specimen, and/or controls to equilibrate to room temperature (15-30°C) prior to testing.

For Drug Test Strip:

1. Equilibrate the test strip,urine specimens or external controls to room temperature(15-30°C) prior to testing.

2. Remove the test strip from the sealed pouch and dip the end of the strip into the specimen for at least 15 seconds to 20 seconds or until migration occurs.

Immerse the strip just below the top line of the wave line on the test strips.

3. Place the test strip on a flat dry surface.

4. Read the results at 5 to 10 minutes.

For Drug Test Card:

1. Equilibrate the test card, or the test strip, urine specimens or external controls to room temperature(15-30°C) prior to testing.

2. Removing the test card from the sealed pouch and dip the card into the specimen for at least 15 seconds to 20 seconds or until migration occurs.

Immerse the strip(s) of the test card just below the top line of the wave line on the test strips; do not dip the card above the top line.

3. Place the test card or the test strip on a flat dry surface.

4. Read the adulteration strips between 3 to 5 minutes (when applicable) by comparing the colors in the adulteration pads to the enclosed color chart. If the specimen indicates adulteration , refer to your Drug Free Policy for guidelines on adultered specimens. We recommended not to interpret the drug test results and suggest you to retest the urine by using another specimen.

5. Read the results at 5 to 10 minutes.

For Drug Test Device:

Allow the test device, urine specimen, and/or controls to equilibrate to room temperature(15-30°C) prior to testing.

1. Bring the pouch to room temperature before opening it. Remove the test device from the sealed pouch and use it as soon as possible.

2. Place the test device on a clean and level surface. Hold the dropper vertically and transfer 3 full drops of urine (approx. 100 mL) to the specimen well (S) of the test device, and then start the timer. Avoid trapping air bubbles in the specimen well (S). See the illustration below.

3. Wait for the colored line(s) to appear. The result should be read at 5 to 10 minutes. It is important that the background is clear before the result is read.

For Drug Test Cup：

Allow the cup, urine specimen, and/or controls to reach room temperature (15-30°C) before testing.

1. Remove the cup from the sealed pouch and use it as soon as possible.

2. Collect specimen in the cup and secure the cap tightly.

3. If the temperature strip is included with Drug Test Cup, please read urine temperature between 2-4 minutes after voiding to verify the temperature ranges between 90-100℉(33-38℃).

4. Place the cup on a flat surface.

5. Date and initial the security seal, and place the security seal on the cap.

6. Peel off the label on the cup to view the results.

7. If adulteration test is included on the test cup, read the adulteration test results between 2 to 5 minutes. See the color chart for interpretation. If the specimen indicates adulteration, we recommend not to interpret the drug test results and either retest the urine or collect another specimen.

8. Read the results at 5 to 10 minutes. See the illustration below. For detailed operation instructions, please refer to the Procedure Card.